<tbody id="mgaoq"></tbody>
  • <tbody id="mgaoq"><pre id="mgaoq"></pre></tbody>

    <rp id="mgaoq"><object id="mgaoq"></object></rp>

    高級搜索 標王直達
    包裝機械  包裝機  打包機  瓦楞機  油墨助劑  封口機  包裝制品  圓筒機  寫真機  MBS 
     
     
    發布信息當前位置: 首頁 » 供應 » 印刷材料 » 印刷耗材 » 絲印油墨 »

    金屬電鍍移印油墨

    點擊圖片查看原圖
    品牌: 歐萊斯
    單價: 220.00元/公斤
    起訂: 1 公斤
    供貨總量: 100000 公斤
    發貨期限: 自買家付款之日起 3 天內發貨
    所在地: 上海 嘉定區
    有效期至: 長期有效
    最后更新: 2020-08-27
    瀏覽次數: 47
    詢價
    公司基本資料信息
     
     
    產品詳細說明

    金屬電鍍移印油墨銷售廠家!

    1、本產品是采用**進口丙烯酸樹脂和**顏料經過細制研磨加工組合而成,適用范圍:各種金屬噴涂面、金屬噴漆面.金屬表面.金屬烤漆面.陶瓷、石材、電鍍(含水電鍍)、陽極氧化鋁表面、靜電噴漆面及烤漆面等制品的絲印及移印,不需加固化劑,不需烘烤,即可獲得優異的附著力。

    2、產品特性:平光、附著力佳、流平性佳、硬度強、耐*、耐沖壓、抗刮傷、耐化學品。

    3、稀釋劑:建議采用本公司配套專用稀釋劑開油。

    4、固化劑:本產品無需加固化劑,切勿加不配套的固化劑,會影響其效果

    5、油墨調配方法:攪拌時先加稀釋劑10%左右稀釋到印刷適合粘度。

    6、干燥時間:恒溫表干時間自然揮發5-10分鐘,實干時間在24小時以內,48小時后達**性能,烤箱80℃烘烤15分鐘性能更優。冬天視地區而定。

    7、使用期限:一年,過期請棄用,加了其他助劑剩余油墨不可回收。

    【油墨使用注意事項】

    1、試印確認符合要求后再批量生產。

    2、做好被印物的表面清除油脂及雜質工作,以促進附著效果。

    3、附著力、硬度、耐酸性、耐*性、耐化學品性、抗劃傷性、耐磨性等性能的檢測,需要完全固化后方可檢測。

    4、未經允許情況下,不得將本系列油墨與其它類型油墨混用及配色。

     

    5、絲網印刷加適量拉絲膏用本公司特慢干稀釋劑更適宜印刷工藝順暢。

     

    【油墨性能檢測結果】

    1、3M膠紙粘在畫有百格的油墨表面45度角迅速拉起不脫油。

    2、純度99%的*500G力在油墨表面來回擦拭100次無脫色。

    【油墨使用安全規則】

    1、油墨,稀釋劑使用及儲存時嚴禁煙火

    2、使用時注意施工場所的通風狀況良好。

    3、盡量避免皮膚直接接觸。

    4、本品不慎濺入口、鼻、眼、耳內,應用大量水清洗或直接求助醫生。

    5、對本品過敏者,使用前應涂覆一層皮膚扶膚膏或戴不滲透手套。

    6、注意作業車間的濕度,濕度過大會影響附著力,溫度高容易堵網。

     

     

    Brand: but MY product name: one from a dry metal INK Numbers: 6486694 

     

    1, the product is produced with advanced import acrylic resin and senior pigment after fine grinding system combination to, suitable scope: all kinds of metal coating surface, metal paint surface. The metal surface. metal paint surface. Ceramic, stone, electroplating (water cut electroplating), anodic alumina surface, electrostatic spray paint surface and paint surface and so on products of screen and pad printing, not needing curing agent, and does not need to bake, can obtain excellent adhesion. 

    2, the product characteristics: good, adhesion, classification includs glass flow ping sex good, strong hardness, resistance to alcohol resistance, stamping, resistance to scratch, resistance to chemicals. 

    3, thinner: this company recommended supporting special thinner, open oil. 

    4, curing agent: this product need not add curing agent, do not add do not supporting the curing agent, it will affect its effect 

    5, printing ink allocation methods: first when stirred with thinner 10% dilution to printing for viscosity. 

    6, dry time: constant temperature dry time table natural volatilize 5-10 minutes, action in time within 24 hours, after 48 hours of the best performance, preheat the oven to 80 ℃ bake 15 minutes more optimal performance. Winter varies from area to area. 

    7, use period: a year, overdue please cut up, add the other additives surplus ink not recycling. 

    【 precautions 】 use ink 

    1, ShiYin confirmed again after meet the requirements of production. 

    2, ready to print the surface of things clear grease and impurities work to promote adhesion effect. 

    3 and adhesion, hardness, resistance, resistance to alcoholic acid resistance, chemical resistance character, anti-damage, wear resistance performance testing, all need to solidify rear can test. 

    4, without their permission, may not use the ink series with other kinds of printing ink mix and match colors. 

    5, screen printing and an appropriate amount of cream with the company's drawing slow dry thinners is more suitable for printing process smoothly. 

    【 ink performance test results 】

    1, 3 M stuck in the picture has the tape's ink surface 45 degree Angle quickly pull up not to take off oil. 

    2 and purity, 99% alcohol 500 G force in ink surface wipe 100 times back and forth without decoloring. 

    【 ink use safety rules 】

    1, printing ink, thinner, use and storage are prohibited during the fireworks 

    2, when using note the construction site of the ventilation in good condition. 

    3, try to avoid direct contact with the skin. 

    4, this product he splashed entrance, nose, eyes, ears, and application in large amounts of water cleaning or directly for help doctors. 

    This article 5, allergy, before the use should be coated a layer of skin and skin creams or wear infiltration gloves. 

    6, pay attention to the work of the workshop, humidity will influence humidity adhesion, high temperature easy plugging nets. 

     

     
    更多»本企業其它產品

    [ 供應搜索 ]  [ 加入收藏 ]  [ 告訴好友 ]  [ 打印本文 ]  [ 關閉窗口 ]

     
    棋牌娱乐平台